Which product do I need?
In our knowledge base you will find the best suitable product/application to solve your problem.
To keep parking roofs and driveways made of concrete or mastic asphalt in good condition, maintenance of these surfaces is necessary.
Latexfalt Parkdeck SE is a suitable renovation system and provides these surfaces with a new top layer.
Various applications have been developed to keep asphalt-like industrial floors in good condition.
Depending on the desired maintenance, there are various products that give the company floors a new top layer or with which local repairs can be carried out.
Latexfalt Parkdeck SE is a highly modified cationic bitumen emulsion, and ideally suited for finishing parking roofs and driveways. The optimum result of the surface is obtained with a two-layer treatment with the Latexfalt Parkdeck SE, sprinkled with crushed stone 4-8 and/or 2-5 mm, for example basalt. Latexfalt Parkdeck SE is particularly suitable for the renovation of old mastic asphalt constructions. In combination with the wear-resistant stone chips, the Latexfalt Parkdeck SE offers optimal protection of the substrate
The Latexfalt flooring emulsion SE can be used in cement-bitumen-bonded screeds with a layer thickness of 15 – 30 mm. The result is a seamless industrial floor that is ideally suited for renovating worn concrete floors, stelcon plates and clinker paving. Areas of application are warehouses, storage sheds, parking garages and exhibition halls.
Latexfalt floor emulsion HD can be used in cement-bitumen-bonded screeds with a layer thickness of 15 – 30 mm and has a higher compressive strength than the SE emulsion. The result is a seamless industrial floor that is ideally suited for renovating worn concrete floors, stelcon plates and clinker paving. Areas of application are warehouses, storage sheds, parking garages and exhibition halls.
The Latexfalt Skimcoat consists of polymer-modified bitumen emulsion which must be mixed with a special mixture of fillers. The layer thickness of the finish is approximately 1 to 2 mm.
This makes the finish suitable for renovating surface damage, especially in bituminous floors such as Latexfalt floors and road construction asphalt.
The Latexfalt Coldfix is a repair mortar based on Latexfalt floors emulsion SE. The mortar is suitable for filling damage, holes and repairing height differences in industrial floors. In addition, the Coldfix is particularly suitable for filling in height differences at foundation beams and subsidence of existing asphalt and concrete floors. Finishing can be terminated at zero if desired.
The Latexfalt Coldfix exists in two versions;
Would you like to have more information about a product? Please send a request by using the Contact form.
For questions you can always contact us by phone: +31 (0)71 341 91 08 of email@example.com