Surface dressing

Wear layers

As a result of various factors, wear on asphalt pavements is accelerated, such as climate, intensive and heavy (work) traffic. In response to these factors, wear on asphalt pavements occurs at the expense of asphalt's skid resistance and safety. Wear layers are maintenance methods for treatment of various asphalt surfaces; bridges, pedestrian and bicycle paths, parking lots and road surfaces. The application of wearing course treatment is a relatively durable, inexpensive and efficient asphalt maintenance measure. A wearing course treatment involves a rapid application in which the wear and tear on the asphalt road is repaired, preventing asphalt repairs. The service life of the asphalt is extended in this way, and wear layer maintenance also improves skid resistance and safety. 

What is a wearing course?

A wearing course is a surface treatment, a way of maintaining an asphalt road. A preservative layer is applied to an existing asphalt pavement to protect the surface from heavy loads, water and dirt in this way. Existing cracks and unevenness in the road surface are sealed using a wearing course treatment, wearing courses also provide protection against changing weather conditions. 

What does a wearing course do?

A wearing course is a maintenance method for asphalt preservation, thus protecting it from moisture penetration and possible stone chips. A bitumen emulsion is applied to the existing asphalt pavement, the bitumen fills in the cracks and unevenness and is thus sealed. After application of the bitumen emulsion, the road surface is dusted with crushed stone whereby a thin preservation layer is realized. Latexfalt has developed various emulsions suitable for treatment of road surfaces and wearing courses. Latexfalt also supplies colorable bitumen emulsions, which realize a colorable wearing course. In addition to supplying wearing course emulsions, Latexfalt also applies the bitumen emulsions and binders using our spray trucks. 

Surface dressing (Latexfalt® Slijtlaagemulsie SE) 

Latexfalt Slijtlaagemulsie SE is the standard bitumen emulsion for surface treatments.
The balanced wear layer emulsion and contains excellent wetting and adhesion properties.
The Latexfalt Wearing Layer Emulsion SE has been specially developed for applying surface treatments in the months of April to September.

  • Standard wear layer emulsion
  • Good wetting and bonding properties

Modimuls® CS

Latexfalt Modimuls CS is a rapid setting bitumen emulsion, which can be used as a sealant for all kinds of surfaces.
Modimuls CS is especially designed for chipless sealing of asphalt constructions or for high performance tack coat applications.
Due to the low penetration grade bitumen used, the film formed after precipitation of the emulsion is strong and most importantly, non-sticky.
This solid film has excellent bonding properties and has excellent waterproofing characteristics.

  • Sealing asphalt structures or tack coat applications
  • Strong and non-sticky

Latexfalt® Safegrip SE

Latexfalt Safegrip SE is a polymer modified bitumen emulsion. This standard bitumen emulsion which has been specially developed for membranes and surface treatments. Safegrip SE has a water-repellent and stress-absorbing effect,
to protect or strengthen asphalt structures and concrete structures. For optimal protection, a two-layer system is required Safegrip SE to be fitted.

  • Standard wear layer for wooden bridge decks and concrete surfaces
  • Polymer modified

Latexfalt® Safegrip Color SE

Latexfalt Safegrip Color SE is a polymer modified and colorable bitumen emulsion.
This product is used for the preservation of concrete and asphalt structures. Also as a protective layer on wooden bridge decks. Safegrip Color SE serves as protection against deterioration and penetration of water and de-icing salts.
Color signaling between the layers is also possible as a signaling and security layer.

  • Colorable bitumen emulsion
  • Preservation and Protection (subcategory) Asphalt Repair

Latexfalt® Safegrip SK

Latexfalt Safegrip SK, has been specially developed for use on steep slopes and vertical surfaces, 
but is also extremely well suited for wearing courses on wooden bridge decks or decking.  The bitumen emulsion is used for surface treatments as well as SAMI,
to protect concrete, asphalt or wood. The application serves as protection for the construction in question, against attack or penetration of water and de-icing salts.

  • Highly inclined and vertical surfaces
  • Suitable as surface treatment and SAMI

Would you like to have more information about a product? Please send a request by using the Contact form.

For questions you can always contact us by phone: +31 (0)71 341 91 08 of info@latexfalt.com

Direct contact

Direct contact

Enter your contact details
preventief_wegenbouw
Service Life Extension

Service Life Extension

Freesasfalt 1 - bewerkt
Re-use [Recycling]

Re-use [Recycling]

Freesasfalt 1 - bewerkt

Re-use [Recycling]

info
Spraykote
Foundation & roofing conservation

Foundation & roofing conservation

Blok-hoofdpagina - Halffabricaten
Industrial Emulsion

Industrial Emulsion

Contact - Veel gestelde vragen
Tekst - Tegels tekst home [EN]

Which product do I need?

In our knowledge base you will find the best suitable product/application to solve your problem.

Latexfalt B.V. logo
Latexfalt B.V.
infoView the knowledge base

Copyright © 2024 Latexfalt B.V. | Site-Index | Cookies | Disclaimer | Privacyverklaring | Terms & Conditions |

Designpro.nl | Z-IM